OEM Equipment

Reliable Components for OEM Manufacturers

PROTEGO® Flame Arresters and FLAMEFILTER® units are supplied as OEM product variants that are integrated by qualified and approved manufacturers into their own branded equipment. These components are tested and certified together with the complete equipment assembly to ensure consistent safety performance and regulatory compliance at system level. Agile Supply Chain Management and fully intergrated Quality Assurance provides seamless integration of PROTEGO® components into your system.

Protection of Flares Systems

Flare systems require reliable protection against flame flashback, particularly where combustible vapors are routed between tanks, headers, and flare stacks. In OEM flare assemblies, PROTEGO® components as   Pressure Vacuum Relief Valves Soupape de surpression et dépression A pressure and vacuum relief valve is a pressure equalization valve for impermissible pressure and vacuum in a closed system. , Deflagration and Detonation Flame Arresters are integrated at defined points in the system to control flame propagation and pressure effects. 

Highlights

Robust Protection
Reliable flame arresting and pressure protection for flare systems
Customized Solutions
Tailored to local regulations, operating conditions, and customer requirements
Flexible Integration
OEM variants fit seamlessly into diverse equipment designs and applications
Certified Safety Components
Tested for consistent safety performance and regulatory compliance

Products for Flare Systems

DA-SB
In-Line Detonation Flame Arrester
Explosion Group
IIA1
D / IIA
C / IIB1
C / IIB2
C / IIB3
B / IIB
B / IIC
LH/AD
Deflagration Flame Arrester, End-of-Line
Explosion Group
IIA1
D / IIA
C / IIB1
C / IIB2
C / IIB3
B / IIB
B / IIC
VD/TS
Pressure/Vacuum Relief Valve
vacuum range
-2 up to -25 mbar
pressure range
3.5 up to 50 mbar
Explosion Group
IIA1
D / IIA
C / IIB1
C / IIB2
C / IIB3
DR/SBW
In-Line Detonation Flame Arrester
Explosion Group
D / IIA
C / IIB3

Highlights

Proven performance 
using PROTEGO® FLAMEFILTER® technology
Certification 
with the OEM device
Safeguarding
against potential explosions
Compact integration
into the OEM equipment

Products for Flare Systems

DA-SB
In-Line Detonation Flame Arrester
Explosion Group
IIA1
D / IIA
C / IIB1
C / IIB2
C / IIB3
B / IIB
B / IIC
VD/SV-HRL
Pressure/Vacuum Relief Valve
vacuum range
-2 up to -35 mbar
pressure range
3.5 up to 35 mbar
Explosion Group
IIA1
D / IIA
EB
Deflagration Flame Arrester, endurance burning proof, End-of-Line
Explosion Group
IIA1
D / IIA
C / IIB1
C / IIB2
C / IIB3
B / IIB
DR/SBW
In-Line Detonation Flame Arrester
Explosion Group
D / IIA
C / IIB3

Protection of Fans and Blowers

PROTEGO® OEM  Flame Arresters are integrated into fan and blower assemblies to interrupt flame transmission while maintaining functional flow characteristics. OEM solutions for fans and blowers include Flame Arresters designed specifically for use with vacuum Dépression Vacuum is the pressure in an enclosed space that is lower than the ambient pressure. pumps, compressors, and blower systems. These units are installed upstream or downstream of rotating equipment as required by the application and can be supplied as part of a complete, tested equipment configuration or, as a retrofitted unit to provide additional protection.

A 3D rendering shows an industrial fan connected to piping, with red inline safety devices on both sides and dashed lines indicating monitoring or control connections.
A 3D rendering shows a blue industrial blower or compressor on a metal frame connected to piping, with red inline safety devices on both sides and dashed boxes indicating monitored sections.

Protection of Vacuum Pumps

PROTEGO® OEM Flame Arrester Units are incorporated directly into vacuum pump assemblies. Integrated solutions include Flame Arrester Units installed on inlet and outlet connections of vacuum pumps, compressors, and blowers. These configurations provide consistent protection across operating modes while remaining compatible with OEM equipment layouts and service access requirements.

Products for OEM Equipment

EV/VS, EV/VD
Flame Arrester Unit
Explosion Group
IIA1
D / IIA
C / IIB1
C / IIB2
C / IIB3
B / IIB
B / IIC
DR/ES
In-Line Detonation Flame Arrester
Explosion Group
IIA1
D / IIA
C / IIB1
C / IIB2
C / IIB3
FA-I
In-Line Deflagration Flame Arrester
Explosion Group
IIA1
D / IIA
C / IIB1
C / IIB2
C / IIB3

We would like to express our gratitude to the PROTEGO® team for the extraordinary support provided to us in identifying and resolving the trouble of a premature opening of one of our ammonia tank safety valves. Your flexibility in dealing with the subject, the displayed sense of urgency, and immediate and professional hands-on approach are exceptional and clearly distinguish you from other OEMs in the industry. 

Get in Touch

Contact our engineers for your 
individual requirements