VD-SV-EB
Pressure/Vacuum Relief Valve deflagration- and endurance burning-proof
Características
Função e descrição
Combined Pressure and Vacuum Relief Valve
The Deflagration-Proof and Endurance-Burning-Proof VD-SV-EB Type PROTEGO® valve is a highly developed combined pressure/vacuum relief valve Soupape de surpression/dépression Pressure/vacuum relief valve is an umbrella term that includes pressure or vacuum relief valve as well as pressure and vacuum relief valve. for high flow capacities with the integrated Flame Arrester PROTEGO® EB. It is primarily used as a device Appareil A device is a pipe component that influences the media flow by opening, closing, or partially shutting off the flow channel or by dividing or mixing the media flow. for flame transmission-proof Flame transmission-proof Characteristic of a device to avoid flashback. in-breathing and out-breathing in tanks, containers, and process equipment. The valve offers reliable protection against over pressure and vacuum Dépression Vacuum is the pressure in an enclosed space that is lower than the ambient pressure. , prevents out-breathing of product vapor and in-breathing of air almost up to the set pressure Pression de réponse Set pressure is the gauge pressure at the device inlet at which the relief device is set to start opening under service conditions. , and protects against atmospheric deflagration and endurance burning Endurance burning Stabilized burning for an unlimited time. if stabilized burning occurs.
10%-Technology
The PROTEGO® Flame Arrester Unit is designed to achieve minimum pressure drop with maximum safety. The Deflagration-Proof and Endurance-Burning-Proof PROTEGO® VD-SV-EB device is available for substances from explosion group IIA (NEC group D MESG > 0.9 mm). When the set pressure is reached, the valve starts to open and reaches full lift Course Lift is the actual travel of the valve pallet from the main valve out of the closed position. within 10% overpressure Surpression Overpressure refers to an increase in pressure in a system or vessel above the normal operating pressure. . This unique 10% technology enables a set pressure that is only 10% below the maximum allowable working pressure (MAWP) of the tank.
Advanced Manufacturing Technology
After years of development, this typical opening characteristic of a safety relief valve is now also available for the low pressure range. The tank pressure Pression de la cuve Tank pressure is the pressure within a tank. is maintained up to the set pressure with a tightness that is above the normal standards due to our state-of-the-art manufacturing technology. This feature is ensured by valve seats made of high quality stainless steel and with individually lapped valve pallets (1), or with an air cushion seal Joint A seal prevents or limits unwanted transfer of product from one container to another. Seal is used as superordinate term for all types of sealing elements. (2), in conjunction with a high quality FEP diaphragm Membrane A diaphragm is a thin layer of material, which has a large surface area. . The valve pallets are also available with a PTFE seal to prevent them from sticking when sticky substances are used and to enable the use in corrosive fluids. After the overpressure is released, the valve re-seats and provides a tight seal.
Main Component – PROTEGO® Flame Arrester Unit
If the set pressure is exceeded, explosive gas/product vapor/air mixtures are released into the atmosphere. If this mixture ignites, the integrated Flame Arrester PROTEGO® EB (3) prevents flame transmission into the tank. If additional mixture continues to flow and stabilized burning occurs, the integrated flame arrester unit Flame arrester unit Flame arrester casing with FLAMEFILTER® set. prevents flashback as a result of endurance burning. The valve is protected and also fulfils its function under these severe conditions. The spring Ressort A spring is a spiral of wire which returns to its original shape after it is pressed or pulled. -loaded weather hood Capot de protection contre les intempéries A weather hood is a cover to protect the internal components of a device from environmental influences. opens as soon as the melting element Elément fusible The melting element is a component that consists of a housing with a lower and upper part. (4) melts.
Many Individual Certifications
The valve can be used at an operating temperature Operating temperature Temperature reached when the equipment is operating under design conditions. of up to +60°C / 140°F and meets the requirements of European Tank Design Standard EN 14015 (Appendix L) and ISO 28300 (API 2000). EU conformity according to the currently valid ATEX directive. Approvals according to other national/international regulations on request.
Tabela de dimensões
Para escolher o diâmetro nominal (DN), veja os diagramas de vazão nas páginas seguintes
| DN | DN2 | a | b | c | d | e | f | g |
| 150 / 6“ | 400 / 16“ | 705 / 27.76 | 844 / 33.23 | 802 / 31.57 | 957 / 37.68 | 235 / 9.25 | 1500 / 59.06 | 109 / 4.29 |
| 200 / 8“ | 400 / 16“ | 705 / 27.76 | 939 / 36.97 | 802 / 31.57 | 1027 / 40.43 | 235 / 9.25 | 1500 / 59.06 | 109 / 4.29 |
Dimensões em mm
Dimensions for pressure valves with heating jacket upon request
Seleção do material do corpo
| Design | B | C |
| Housing | Steel | Stainless Steel |
| Heating jacket (VD-SV-EB-H-...) | Steel | Stainless Steel |
| Valve seats | Stainless Steel | Stainless Steel |
| Gasket | PTFE | PTFE |
| Flange ring | Steel | Stainless Steel |
| Weather hood | Steel | Stainless Steel |
| Flame arrester unit | A | A, B |
Special materials upon request
Combinações de material do conjunto abafador de chamas
| Design | A | B |
| FLAMEFILTER® cage | Steel | Stainless Steel |
| FLAMEFILTER® | Stainless Steel | Stainless Steel |
| Safety bar | Stainless Steel | Stainless Steel |
Special materials upon request
Seleção do material do disco da válvula de pressão
| Design | A | B | C | D | E | F |
| Pressure range [mbar] [inch W.C.] | +2.0 up to +3.5 +0.8 up to +1.4 | >+3.5 up to +14 >+1.4 up to +5.6 | >+14 up to +35 >+5.6 up to +14 | >+35 up to +60 >+14 up to +24 | >+14 up to +35 >+5.6 up to +14 | >+35 up to +60 >+14 up to +24 |
| Valve pallet | Aluminium | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Sealing | FEP | FEP | Metal to Metal | Metal to Metal | PTFE | PTFE |
Special material as well as higher set pressure upon request
Seleção do material do disco da válvula de vácuo
| Design | A | B | C | D | E | F |
| Vacuum range [mbar] [inch W.C.] | -2.0 up to -3.5 -0.8 up to -1.4 | <-3.5 up to -14 <-1.4 up to -5.6 | <-14 up to -35 <-5.6 up to -14 | <-14 up to -35 <-5.6 up to -14 | <-35 up to -60 <-14 up to -24 | <-35 up to -60 <-14 up to -24 |
| Valve pallet | Aluminium | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Sealing | FEP | FEP | Metal to Metal | PTFE | Metal to Metal | PTFE |
Special material as well as higher set pressure upon request
Seleção do grupo de explosão
| MESG | Expl. Gr. (IEC / CEN) | Gas Group (NEC) |
| > 0,90 mm | IIA | D |
Special approvals upon request
Tipo de conexão flangeada
| EN 1092-1; Form B1 |
| ASME B16.5 CL 150 R.F. |
other types upon request
Versão e especificação
Any combination of vacuum and pressure levels can be set for the valveThe valve discs are weight-loaded.
Outros dispositivos especiais sob solicitação
Ajustes de pressão
| Pressão: | +2.0 mbar | +60 mbar |
| +0.8 inch W.C. | +24 inch W.C. | |
| Vácuo: | -2.0 mbar | -60 mbar |
| -0.8 inch W.C. | -24 inch W.C. |
Higher and lower settings upon request
Diagrama de vazão
Este diagrama de vazão foi determinado em uma bancada de medição de vazão calibrada e certificada pela TÜV. A vazão V em m³/h se refere ao estado técnico padrão de ar, conforme ISO 6358 (20°C, 1bar). Para conversão em outras densidades e temperaturas, veja o cap. 1: Bases técnicas.
