Características
Função e descrição
Automatic Venting Valves for Floating Roof Tanks
PROTEGO® Lift-Actuated Vent Valves Type AL-DK-D provide automatic venting of floating roof Toit flottant A floating roof is the roof of a tank that is fitted with floating chambers (pontoons) and lies on top of the liquid. tanks when the floating roof is lowered onto its supports and the tank is either drained or refilled. When the floating roof is in its lowest position, the valve is forced to open through lift Course Lift is the actual travel of the valve pallet from the main valve out of the closed position. actuation, which prevents inadmissible vacuum Dépression Vacuum is the pressure in an enclosed space that is lower than the ambient pressure. during final draining or inadmissible pressure during refilling.
Design of Valves
The PROTEGO® AL-DK-D valve consists of a housing Corps A housing is a solid shell, which surrounds a content, either protecting the content from external influences, or protecting the environment from the content. (1) with a sheet metal panel to be welded onto the floating roof or a flange for mounting on a mating flange, two or four flanged connection nozzles (2) for installation of vent caps, cover (3), lift (4) including valve disc (5), lift pipe (6), and the condensate drain valve (7) which can be designed to be flame transmission proof. The condensate drain is sealed by a flat gasket attached to the valve disk (5). The cover (3) is sealed by a sealing cord Cordon d'étanchéité A sealing cord is a synthetic cord with a circular or square profile. It is used to seal off components. (8).
Dimensions for Different Floating Roof Heights
As the lowest position of the floating roof varies for operation and assembly, specify the dimensions h1 and h2: h1: Distance between the lower edge of the connection of the equipment and the tank bottom at the lowest level of the floating roof in the operating position (operating position with an empty tank). h2: Distance between the lowest level of the floating roof in the maintenance position and the lowest level of the floating roof in the operating position (operating position with an empty tank).
Conversion of Floating Roof Supports and Extension of the Plunger
If the floating roof supports are changed from operating position to maintenance position, the lift has to be extended as well. This is done with an adjustable locking pin that is secured with a split pin. The valve is not flame transmission proof. Based on a hazard analysis with regard to material selection and function, the valves have no potential ignition sources. As a result, they are not subject to the European Explosion Explosion Réaction brusque d’oxydation ou de décomposition entraînant une élévation de température, de pression ou des deux simultanément. Protection Directive (ATEX) when used in explosive atmospheres.
Combined With Atmospherically Deflagration and Endurance Burning Proof Vent Caps
Lift-actuated vent valves PROTEGO® AL-DK-D can be combined with atmospherically deflagration-proof and endurance burning Endurance burning Stabilized burning for an unlimited time. -proof vent caps.
Tabela de dimensões
| AL-DK-D | AL-DK-D-4 | |||
| DN1 | 200 / 8" | 200 / 8" | 200 / 8" | 200 / 8" |
| DN2 | 150 / 6" | 200 / 8" | 150 /6" | 200 / 8" |
| a | 350 / 13.78 | 350 / 13.78 | 350 / 13.78 | 350 / 13.78 |
| b | 905-1580 / 35.63-62.02 | 830-1580 / 32.68-62.02 | 689-1950 / 27.13-76.77 | 689-1950 / 27.13-76.77 |
| c | 870 / 34.25 | 870 / 34.25 | 870 / 34.25 | 870 / 34.25 |
| d | 600 / 23.62 | 600 / 23.62 | 600 / 23.62 | 600 / 23.62 |
| e | 415 / 16.34 | 415 / 16.34 | 415 / 16.34 | 415 / 16.34 |
| f | 370 / 14.57 | 370 / 14.57 | 370 / 14.57 | 370 / 14.57 |
| g | 460 / 18.11 | 460 / 18.11 | 460 / 18.11 | 460 / 18.11 |
| x | 974-1950 / 38.35-76.77 | 974-1950 / 38.35-76.77 | ||
| Weight (kg)* | max. 254 | max. 277 | max. 392 | max. 489 |
Dimensões em mm
* The dimensions and weight vary depending on the type of endurance burning flame arrester.
Material
| Housing | Steel |
| Valve guide | Stainless Steel |
| Gasket | FPM |
Materiais especiais mediante consulta
Tipo de conexão flangeada
| EN 1092-1, forma B1 ou DIN 2501, forma C, PN 16 , a patir DN 200 PN 10 | EN ou DIN |
| ASME B16.5 CL 150 R.F. | ASME |
Outras conexões mediante consulta
Dados necessários para a especificação
Produto armazenadoDiâmetro do tanque (m)
Altura do tanque (m)
Altura do suporte h1 (posição de operação com tanque vazio)
Altura do suporte h2 (posição de montagem elevada)
Pressão máxima admissível do tanque pT (mbar)
Potência da bomba (m³/h)
Seleção e Desenho
The required quantity and nominal size Diamètre nominal The nominal size is an alphanumeric designation of size for components in a piping system, used for reference purposes, comprising the letters DN followed by a dimensionless integer that is indirectly related to the physical size of the bore or outside diameter of the connections, expessed in millimeters. DN will be defined based on the calculated flow rate from the thermal venting and pumprate in lowest floating roof position (Nm³/h or CFH) and based on the maximum acceptable tank pressure Pression de la cuve Tank pressure is the pressure within a tank. pT (mbar / inch W.C.) according to the flow capacity charts. Special models are available on request.Flow rates and pressure losses of vent caps PROTEGO® EB or PROTEGO® BE/HR-400 have additionally to be taken into account according to the appropriate charts in the relevant data sheetsor operating instructions.Versão e especificação
Two designs are available:Diagrama de vazão
Este diagrama de vazão foi determinado em uma bancada de medição de vazão calibrada e certificada pela TÜV. A vazão V em m³/h se refere ao estado técnico padrão de ar, conforme ISO 6358 (20°C, 1bar). Para conversão em outras densidades e temperaturas, veja o cap. 1: Bases técnicas.
-
Lift-actuated vent valves of type PROTEGO® AL-DK-D can be combined with vent caps type PROTEGO® BE/HR-400 or PROTEGO® EB .
