For Allrounders - EXW2
Informações e documentos
- especially for design engineers, operations engineers, safety representatives, occupational health and safety specialists
- Safety fundamentals and typical applications.
- Demonstration tests at the PROTEGO® Research and Development Centre to establish a detailed and better understanding.
- Hands-on maintenance of PROTEGO® valves and flame arresters on key models ( detonation arrester Detonation flame arrester Flame arrester designed to prevent the transmission of a detonation. , pressure Pressure (gauge pressure) Pressure for which the value is equal to the algebraic difference between the absolute pressure and the atmospheric pressure. and vacuum Vacuum Vacuum is the pressure in an enclosed space that is lower than the ambient pressure. relief pallet valve, pressure and vacuum relief diaphragm Diaphragm A diaphragm is a thin layer of material, which has a large surface area. valve).
- Setting and measuring of set pressure Set pressure Set pressure is the gauge pressure at the device inlet at which the relief device is set to start opening under service conditions. and leakage rates on the test bed.
- Trainees to acquire competence and expert knowledge as persons qualified in explosion protection Explosion protection An explosion protection is a flame arrester that prevents flame propagation into plant sections to be protected during explosions. with specific regard to Protective Systems; where applicable, introduce trainees to the approach to design and sizing of PROTEGO® Valves and Flame Arresters Flame arrester Device fitted to the opening of an enclosure, or to the connecting pipe work of a system of enclosures, and whose intended function is to allow flow but prevent the transmission of a flame. . Informing trainees about safety-related basics and instructing them on how to use the operating instructions.
- Trainees to acquire competence and expert knowledge as persons qualified in explosion protection pursuant to German Industrial Safety Ordinance (BetrSichV) § 14 Subs 1 3 and § 15 as well as TRBS (German Technical Rules for Operational Safety) for protective systems for use as intended in hazardous areas.
- Officially recognised continuation course for immission control and incidents prevention officers pusuant to § 7 No. 2 of No. 5 Federal Immission Control Ordinance (BImSchV).
- 2 VDSI points for safety at work / 3 VDSI points for fire protection.
Wir planen fortlaufend Schulungen in Braunschweig für das Jahr 2026. Die neuen Termine werden etwa 3 Monate vor Durchführung bekanntgegeben, abhängig von der Nachfrage und Buchung der bereits veröffentlichten Termine. Sollten die aktuellen Termine nicht Ihren Vorstellungen entsprechen, empfehlen wir Ihnen, regelmäßig unsere Webseite nach Updates zu prüfen. So bleiben Sie stets informiert und verpassen keinen passenden Schulungstermin.
Crash courses lasting one or several days can be organised on a case-by-case basis (dedicated training programme, cost subject to agreement).
Training is organised and given by experienced and skilled personnel (engineers, skilled mechanics, fitters and electricians).
Every participant will be given an extensive documentation folder as well as a certificate of attendance.
Your way to us
Braunschweiger Flammenfilter GmbH
Industriestr. 11
38110 Braunschweig, Deutschland
Course Description
Próximas datas de seminários
Inscrição
Observe que, devido à alta demanda, a reserva só pode ser efetuada com base em um pedido oficial que inclua o endereço de cobrança e o número do seu pedido.
Se nenhum pedido tiver sido recebido, eventuais pré-reservas (por exemplo, por e-mail) não serão consideradas.