FA-I-FC
Flame Arrester Unit for installation in devices
Características
Función y descripción
Protection Against Atmospheric Deflagrations, Volume Deflagrations, and Engines
The PROTEGO® FA-I-FC Flame Arrester Unit are components installed on or within equipment (e.g. blowers) and have to be tested and approved with this equipment for the respective operating conditions of use. It consists of a FLAMEFILTER® cage Cage d'éléments arrête-flammes The FLAMEFILTER® cage is a housing for a FLAMEFILTER® set. filled with FLAMEFILTER®. The FLAMEFILTER® cages are sized so that they can be installed between flange connections. The component provides equipment manufacturers protection against deflagrations, volume deflagrations or protection of engines.
Main Component – PROTEGO® Flame Arrester Unit
Each Flame Arrester Unit is selected from a modular system that provides each manufacturer the option of using optimized, adapted, and cost-effective protection. Our expert technical staff will assist you with the proper selection of the devices as well as execution of type testing.
For All Explosion Groups and Special Gases
The FA-I-FC Flame Arrester Unit consists of two FLAMEFILTER® (1) installed within the FLAMEFILTER® cage (2). The FLAMEFILTER® diameter and gap size depend on the intended use. FA-I-FC components can be arranged for all explosion groups and special gases such as Ethylene oxide.
Dimensiones
| DN | 50 / 2" | 80 / 3" | 100 / 4" | 150 / 6" | 200 / 8" | 250 / 10" | 300 / 12" | 350 / 14" | 400 / 16" | 500 / 20" | 600 / 24" | 800 / 32" | 1000 / 40" | 1200 / 48" | 1400 / 56" | 1600 / 64" | 2000 / 80" |
| a | - | 135 / 5.31 | 155 / 6.10 | 194 / 7.64 | 248 / 9.76 | 310 / 12.20 | 363 / 14.29 | 420 / 16.54 | 465 / 18.31 | 555 / 21.85 | 655 / 25.79 | 855 / 33.66 | 1070 / 42.13 | 1280 / 50.39 | 1500 / 59.06 | 1700 / 66.93 | - |
| b | - | 90 / 3.54 | 110 / 4.33 | 172 / 6.77 | 225 / 8.86 | 285 / 11.22 | 331 / 13.03 | 380 / 14.96 | 430 / 16.93 | 515 / 20.28 | 615 / 24.21 | 815 / 32.09 | 1015 / 39.96 | 1215 / 47.83 | 1415 / 55.71 | 1615 / 63.58 | - |
| c | - | 50 / 1.97 | 50 / 1.97 | 55 / 2.17 | 65 / 2.56 | - | 70 / 2.76 | - | 70 / 2.76 | 70 / 2.76 | 70 / 2.76 | 80 / 3.15 | 90 / 3.54 | 90 / 3.54 | 110 / 4.33 | 110 / 4.33 | - |
| d | - | - | - | - | - | 76 / 2.99 | - | 86 / 3.39 | - | - | 75 / 2.95 | 85 / 3.35 | 95 / 3.74 | 95 / 3.74 | 115 / 4.53 | 115 / 4.53 | - |
Dimensiones en mm / pulgadas
Material selection for flame arrester unit
| Design | A | B | C |
| FLAMEFILTER® cage | Steel | Stainless steel | Hastelloy |
| Gasket | PTFE | PTFE | PTFE |
| FLAMEFILTER® Set | A | A | C |
Special materials upon request
Combinación de materiales para la unidad apagallamas
| Design | A | C | D |
| FLAMEFILTER® * | Stainless steel | Stainless steel | Hastelloy |
| Spacers | Stainless steel | Stainless steel | Hastelloy |
* the FLAMEFILTER® is also available in the materials Tantalum, Inconel, Copper, etc. when the listed cage materials are used.
Special materials upon request
Selection of FLAMEFILTER® gap
| FLAMEFILTER® gap |
| 0.9 m / 0.7 mm |
| 0.5 mm |
| 0.3 mm |
| 0.2 mm |
If you have any questions regarding the selection of the FLAMEFILTER® (number and gap width), our trained specialists will be happy to advise you.
